SOLD: CNC RADIAL FORGING MACHINE GFM SX-40

• Numbers of Hammers: 4
• Forging force: 2.600 Ton (650t per hammer)
• Strokes per minute: 270
• Hammer length: 550 mm
• Maximum diameter of forging:
  – circular cross section: Ø 450 mm
  – square cross section: 320 mm
• Minimum output diameter:
  – circular: 60 mm
  – square: approx 50 mm
• Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm
• Feed of manipulator A: 7.200 mm
• Feed of manipulator B: 10.000 mm
• Manipulators speed in fast moving: 350 mm/s
• Feed speed of manipulators (steeples regulation): 10 ÷ 100 mm/s
• Cooling water pressure: 3 ÷ 5 bar
• Temperature of inlet water: max. 30°C
• Cooling water consumption: 100 m3 /h
• Pipe diameter for cooling water: 3”
• Compressed air: min. 5 bar
• Pipe diameter for compressed air: Ø20 mm
• Consumption of compressed air: 2 Nm3 /h
• Power supply (nominal power):
  – low voltage site: 450 kW
  – high voltage site: 600 kW

PLC: Siemens S7 – Technology v4.2 with CNC Bosch Rexroth XM21

• Axis height of forging above the hall level: 750 mm
• Maximum height of machine above the hall level: 2.950 mm
• Maximum length of machine at the hall level: 30.000 mm
• Foundation length: 44.000 mm
• Maximum width of machine at hall level without loading device: 8.020 mm
• Foundation width: 18.600 mm
• Machine weight: 439.220 kg