CNC RADIAL FORGING MACHINE GFM SX-16

Numbers of Hammers: 4
Forging force: 800 Ton (200 t per Hammer)
Strokes per minute: 580
Hammer length: 320 mm

Maximum hammer setting scope
– calculated by diameter: 100 mm
Maximum diameter of forging regarding:
– structural steel: circular cross section – Ø 160 mm
square cross section – 130 mm
– high alloy steel: circular cross section – Ø 120 mm
square cross section – 100 mm
Extreme quadrangle: 12 x 120 mm
Maximum length of forging: 6000 mm
Min and Max diameter
of mounting in manipulator: 30 – 160 mm

Feed of manipulator A: 6800 mm
Feed of manipulator B: 7200 mm
Passage through manipulator: Ø 130 mm
Manipulators speed in fast move: 400 mm/s
Feed speed of manipulators
(stepless adjustment): 10 ÷ 115 mm/s

Cooling water pressure: 3 ÷ 5 bar
Temperature of inlet water: max. 30˚C
Cooling water consumption: 34m3/h
Pipe diameter for cooling water: 2”
Compressed air pressure: min. 5 bar
Pipe diameter for compressed air: Ø20 mm
Consumption of compressed air: 1,5 Nm3/h

Power supply (nominal power): 350 kW
Motor voltage: 500 V
Control voltage 220 V
Power of main engine: 200 kW
Power of pump motors: 185 kW
Power of manipulators motors: 2 x 22 kW

Siemens S7 – Technology V4.2 with CNC Bosch Rexroth XM

• Axis height of forging above the hall level: 750 mm
• Maximum height of machine above the hall level: 2.050 mm
• Maximum length of machine on the hall level: 33.740 mm
• Foundation length: 34.200 mm
• Maximum width of machine on hall level without loading equipment: 4350mm
• Foundation width: 15.600mm
• Machine net weight: 124.490 kg